Slack-Free Ratchet Hardware

Each strap uses 1 in polyester webbing with a retractable spool integrated into the ratchet housing to control excess webbing length. The ratchet is alloy steel with a zinc-plated finish, and the handle includes a padded grip surface. Full-bend S-hooks connect to common tie points such as bed loops and trailer anchors. Kit includes four straps and extra connectors wrap-around attachment on bars, rails, or handles.

What the Button Actually Does

The retraction control engages the internal take-up spool so the webbing winds back into the ratchet housing after slack is released. Tension is applied through the ratchet gear and handle, with webbing routed through the mandrel slot like a standard 1 in ratchet assembly. Listed working load is 403 lb with a break strength of 1,209 lb per strap. Soft loops function as adapters when a direct hook-to-point connection is not practical.

Load, Lock, Stow

Route the webbing around the load or through an anchor point, attach S-hooks to fixed tie points, then pull slack by hand before ratcheting. After unloading, release tension and use the retract control to wind remaining webbing into the housing. Store with the ratchet closed and webbing retracted to limit loose strap length in a bin or compartment. Clean using mild soap and water, then air dry before retracting.

Product Benefits:

• Vehicle Tie Points: Full-bend S-hooks fit common bed loops and trailer anchors.
  
• Retractable Webbing: Internal take-up spool winds excess 1 in webbing into the ratchet housing after tension is released.
  
• Wrap-Around Option: Soft loop tie-downs allow attachment around bars, rails, or handles when hooks cannot connect directly.
  
• Manual Operation: Ratchet handle applies tension through the gear mechanism with no external power source.
  
• Storage Format: Closed ratchet with retracted webbing keeps loose strap length contained for storage in small compartments.

Specification:

• Material: Polyester webbing; alloy steel ratchet; zinc-plated hardware; coated steel S-hooks
  
• Dimensions: Strap length 120 in × 1 in 
  
• Weight: 7.76 lb per 4-pack set
  
• Operating Range or Capacity: Working load 403 lb (183 kg); break strength 1,209 lb (548 kg)
  
• Connection Type: Full-bend S-hooks; included soft loop tie-down straps
  
• Placement or Use Area: Truck bed, cargo area, trailer, roof rack, garage tie-down points