Seat-fit focused

This seat cushion uses a square-profile top surface to create defined seating zones across an 18 in by 17 in footprint. The core is viscoelastic polyurethane foam formed to a 2.5 in thickness for consistent seating height. The cover uses a split construction with PU leather and 4D mesh panels for a mixed surface texture. The base uses an anti-slip fabric layer intended to limit sliding on common seat upholstery.

What it does in the cabin

Place the cushion on the driver or passenger seat to add 2.5 in of seating height without any vehicle modification. The foam core compresses under occupant load and returns to shape when unloaded based on viscoelastic material behavior. The PU leather and mesh cover forms the contact surface while the non-slip base interfaces with the seat.

Place, align, store

Set the cushion on a clean, dry seat surface with the anti-slip base facing downward and the square-profile facing up. Align the cushion so the rear edge sits against the seat back and the top surface is centered on the seat pan. For storage, keep the cushion flat to maintain its formed profile. Cleaning follows the listed care method of hand washing.

Product benefits:

• Square-profile surface layout: Top surface uses a square-profile to define seating zones.
  
• Seating height addition: Adds 2.5 in of seating height.
  
• Mixed cover construction: Cover combines PU leather and 4D mesh panels.
  
• Anti-slip base layer: Base uses a non-slip fabric layer to limit movement on seat upholstery.
  
• Multi-seat use: Intended for seats with a flat cushion area in cars, trucks, office chairs, and wheelchairs.

Specifications:

• Material: PU leather and 4D mesh cover; anti-slip base fabric; viscoelastic polyurethane foam core
  
• Dimensions: 18 × 17 × 2.5 in
  
• Weight: 1.04 lb
  
• Feature: Seating height addition 2.5 in
  
• Placement or use area: Interior cabin seats; also usable on office chairs and wheelchairs